|


The Lite-Touch controls
incorporate state of the art
infrared activation to insure fast, accurate setting changes.

    

|
The Lite-Touch Series is the latest addition to the KENYON line of quality ceramic cook tops. Finger touch electronic controls provide the user with a full range of heat settings, and there are no adjustment knobs to get in the way. Clean up of the cooking surface is quick and easy, just wipe with a damp cloth and you're done.
All Lite-Touch cook tops are equipped with quick to heat ribbon elements and dual heating elements. The quick to heat elements "light up" in just 3 seconds and provide a fast adjustment to temperature settings. The "heat boost" feature provides maximum heat, for a short period of time, to quickly bring the cookware up to optimum operating temperature. This feature proves very useful when cooking in the lower to mid temperature range settings.
The Lite-Touch series of smooth surface electronically controlled ceramic glass cook tops are leading the way into the future.

SUNRISE
Textured surface, round edged ceramic glass
Schematic Pop-Up
Model B45001
30"L x 21-1/2"W x 3-5/8"D
240 volt - 30 amp.
1 - 9"/5" (230mm/120mm) dual @2200/750 watts
1 - 8-1/2"/5-1/2" (215mm/136mm) dual @1900/950 watts
2 - 6-1/2" (165mm) @ 1200 watts each

MEDITERRANEAN
Textured surface, beveled edged ceramic glass
Schematic Pop-Up
Model B44001
24"L x 21-1/2"W x 3-1/4"D
240 volt - 30 amp.
1 - 9"/5" (230mm/120mm) dual @2200/750 watts
3 - 6-1/2" (165mm) @1200 watts each
LITE-TOUCH 2
Model B40540L
23-1/4" x 12-3/4" with 1/4" radius
120 volt - 22 amp.
1 - 6-1/2" (165mm) @ 1200watts
1 - 8" (200mm) @ 1400watts
LITE-TOUCH 2 TRIMLINE
Model B40545L
20" x 10-3/4" with 1/4" radius
120 volt - 20 amp.
2 - 6-1/2" (165mm) @ 1200watts
Model B40546L
20" x 10-3/4" with 1/4" radius
120 volt - 10 amp.
2 - 6-1/2" (165mm) @ 1200watts

Safety features, always a consideration at KENYON include:
LOCKOUT FEATURE. helps to prevent accidental activation during clean up or by young, curious children.
RESIDUAL HEAT INDICATOR. HOT Indicator, alerts the user, with an "H" in the display, of burners not yet cooled to the touch. Heat limiters are also included to prevent exceeding the maximum surface temperature. Protects against potential damage caused by over heating empty cookware.
FAULT INDICATOR. gives and audible alert (buzzer) if inputs don't make sense using built-in fuzzy logic. For example, if all four burners are activated simultaneously, a control panel is covered, a sensor is activated for more than 10 seconds or if activated in an incorrect combination, the unit will alert and shut down. Another excellent feature that helps prevent injury to young children.
|
|